單項選擇題

A customer has a BladeCenter H chassis with a single AMM. The AMM is defective. Which of the following is the method to backup the existing AMM so the new AMM automaticlally picks up the configuration? （）

A.Back up the AMM configuration to a file
B.Back up the AMM configuration to the chassis
C.Back up the AMM using IBM Systems Director
D.Back up the AMM using Tivoli Storage Manager

你可能感興趣的試題

單項選擇題

A retail customer installs a BladeCenter into an existing 10/100 Ethernet network. Due to cost considerations, the customer uses Copper Pass-thru Modules. After installing this solution, the customer finds that they have no network connectivity. Which of the following at is causing the problem?（）

A.Copper Pass-thru Modules only support 1000Mb line speeds.
B.Spanning Tree has been enabled on the Copper Pass-thru Module.
C.The customer does not have the latest firmware loaded on the Copper Pass-thru Module.
D.The customer is using LS21 Blades

單項選擇題

A medical customer has an installed HS21 blade with no local disk. They are attempting to set up boot from SAN using a Windows 2003 CD. Which sequence is correct for this procedure? （）

A.Install Windows from the CD using the QLogic driver provided on the CD, configure the LUN and zone for the target server, and then configure the blade UEFI to boot from SAN.
B.Configure the LUN and zone for the target server, install Windows from the CD and press F6 when prompted to supply the driver, and then configure the QLogic adapter BIOS to boot from SAN.
C.Configure the LUN and zone for the target server, configure the QLogic adapter BIOS to boot from SAN, install Windows from the CD, and then press F6 when prompted to supply the driver.
D.Configure the blade UEFI to boot from SAN, configure the LUN and zone for the target server, and then install Windows from the CD using the QLogic driver provided on the CD

感谢您访问我们的网站，您可能还对以下资源感兴趣：

中文字幕网国产

国产一级特黄a大片亚洲浮力影院久久久久久亚洲第一二三区日韩国产国产精品第不卡国产视频第一页