IBM(000-236)章節(jié)練習(xí)(2019.04.30)

A.DNS is not working properly
B.Ping is not working properly
C.The cables are disconnected
D.The device driver did not load properly

A.showmount -e ServerName
B.vi /etc/exports
C.startsrc -g nfs
D.exportfs -i FileSystemName

A.Shuts down en0
B.Displays en0 settings
C.Reconfigures en0 using the ODM
D.Sends an SNMP alert to the network administrator

A.direct 9600 - /dev/tty1
B.Direct tty1 - 9600
C.Direct /dev/tty1 - 9600
D.direct tty1 - 9600

A.nslookup
B.hostname
C./etc/host.equiv
D.environment variable NSORDER

A.DNS
B.NIS
C.DHCP
D.etc/hosts file

A.When running ate for the first time it will prompt for all the required information and configure all the required devices
B.The program is used by cu to communicate to a remote system
C.The program is used for remote communications between the host and a remote system using a modem or null modem via a tty port
D.The program ate calls cu to communicate with the remote system

A./etc/resolv.conf
B./etc/rc.tcpip
C./etc/aliases
D./etc/hosts.equiv

A.smit tty； take the defaults and create the desired tty
B.lsdev -Cc tty； check to see if the desired tty exists， if not create using smit tty Add a line similar to； Direct tty0 - 9600 direct to /etc/uucp/Devices Verify /etc/uucp/Dialers has the following line； direct
C.Install bos.net.uucp and the first available tty will be configured for use by a cu session
D.Run the Asynchronous Terminal Emulation （ate） program and it will configure a tty port for a cu session

A.no
B.chdev
C.frcactrl
D.ifconfig